Energy & Water-Saving Tips for Renters
Even if you rent an apartment, townhouse or a home, you can make a big difference when it comes to energy and water savings. These tips will help you be more energy efficient, save money and reduce the risks of global warming. If there are things on this list that you can't change on your own, perhaps you can share these tips and encourage your landlord to help you make a change for the better.
Top 10 Tips
- Lighting is one of the easiest places to start saving energy. Replacing your 5 most frequently used light fixtures or the bulbs in them with ENERGY STAR®-qualified lights can save more than $65 a year in energy costs. ENERGY STAR-qualified compact fluorescent light bulbs (CFLs) provide high-quality light output, use 75% less energy, and last 6–10 times longer than standard incandescent light bulbs-saving you money on both energy bills and replacement costs.
- Remember to always turn off your lights when leaving a room. Turning off just one, 60-watt incandescent bulb that would otherwise burn 8 hours a day can save about $15 per year!
- Planning to purchase a room air conditioner? Consider an ENERGY STAR-qualified model. They use at least 10 percent less energy than standard models.
- In the winter, be sure to insulate room air conditioners from the outside with a tight-fitting air conditioning unit cover, available at your local home improvement center or hardware store. This keeps heated air from escaping outside. You can also remove a window unit during the winter months to prevent energy losses.
- Be sure the window unit fits tightly in the window, so outdoor air is not getting in.
- If possible, install a programmable thermostat to automatically adjust your home's temperature settings when you're away or sleeping.
- When used properly, a programmable thermostat with 4 temperature settings can save up to $150 in energy costs a year. Proper use means setting the thermostat at energy-saving temperatures, without overriding that setting. You should also set the "hold" button at a constant energy-saving temperature when you're away or on vacation.
- Consumer electronics play an increasingly larger role in your home's energy consumption, accounting for 15 percent of household electricity use. Many consumer electronics products use energy even when switched off. Electronics equipment that has earned the ENERGY STAR rating helps save energy when switched off, while maintaining features like clock displays, channel settings, and remote-control functions.
- Unplug any battery chargers or power adapters when not in use (like your cell phone charger!).
- Use a power strip as a central “turn off” point when you are done using equipment.
- Even when turned off, electronic and IT equipment often uses a small amount of electricity. For home office equipment, this stand-by, or “phantom” power load can range from a few watts to as much as 20 or even 40 watts per piece of equipment. Using a power strip for your computer and all peripheral equipment allows you to completely disconnect the power supply from the power source, eliminating standby power consumption.
- A 10-minute shower can use less water than a full bath.
- With a new 2.5 gallon-per-minute (low-flow) shower head, a 10-minute shower will use about 25 gallons of water, saving you 5 gallons of water over a typical bath. A new shower head can also save energy — up to $145 each year on your electricity bill — beating out both the bath and an old-fashioned shower head.
- To avoid moisture problems, control humidity in your bathroom by running your ventilating fan during - and 15 minutes after - showers and baths.
- Make sure all air registers/intake vent(s) are clear of furniture so that air can circulate freely.
- During cold weather, take advantage of the sun's warmth by keeping drapes open during daylight hours. In warm weather, close window shades and drapes to keep out the summer sun.
- Save water by scraping dishes instead of rinsing them before loading them in the dishwasher. Run your dishwasher with a full load and use the air-dry option if available.
- Rinsing dirty dishes before loading your dishwasher uses a lot of water and energy. Most dishwashers today can thoroughly clean dishes that have had food scraped, rather than rinsed, off — the wash cycle and detergent take care of the rest. To make the most efficient use of your dishwasher's energy and water consumption, run the dishwasher only when enough dirty dishes have accumulated for a full load.
- Wash your laundry with cold water whenever possible. To save water, try to wash full loads or, if you must wash a partial load, reduce the level of water appropriately.
- Hot water heating accounts for about 90 percent of the energy your machine uses to wash clothes; only 10 percent goes to electricity used by the washer motor. Depending on the clothes and local water quality (hardness), many homeowners can effectively do laundry exclusively with cold water, using cold water laundry detergents. Switching to cold water can save the average household more than $400 annually with an electric water heater, or more than $300 annually with a gas water heater.
- Washing full loads can save you more than 3,400 gallons of water each year.
- Don't over-dry your clothes. If your dryer has a moisture sensor that will automatically turn the machine off when clothes are done, use it to avoid over drying. Remember to clean the lint trap before every load. Dry full loads, or reduce drying time for partial loads.
- It's easy to over-dry your clothes if one setting is used for various fabric types. Try to dry loads made up of similar fabrics, so the entire load dries just as the cycle ends. Many dryers come with energy-saving moisture or humidity sensors that shut off the heat when the clothes are dry. If you don't have this feature, try to match the cycle length to the size and weight of the load. A dryer operating an extra 15 minutes per load can cost you up to $34 per year.
- The lint trap is an important energy-saver. Dryers work by moving heated air through wet clothes, evaporating and then venting water vapor outside. If the dryer cannot provide enough heat, or move air sufficiently through the clothes, they will take longer to dry, and may not dry at all. One of the easiest things you can do to increase drying efficiency is to clean the lint trap before each and every load. This step also can save you up to $34 each year.